AL-E849 STUDY OF I/P AND P/I CONVERTER
Project Information
- Category: MECHANICAL ENGINEERING
- Sub Category: PROCESS CONTROL TRAINER
- Model Number:
- Category: MECHANICAL ENGINEERING
Description
Description
I/P and P/I converter setup is designed for understanding basic principles of electronic and pneumatic signal conversion. The setup consists of I/P converter, P/I converter, digital calibrator, pressure gauges and air regulator and air filter regulator. The Digital calibrator is used as current source to supply 4-20 mA DC to I/P converter and to measure the output current in mA DC from P/I converter. I/P converter gives the output as 3-15 psig and P/I
converter gives output as 4-20 mA DC. All the components along with necessary piping and fittings are mounted on support housing designed for tabletop mounting. Set-up enables study of I/P and P/I converter working, calibration and characteristics of linearity, hysteresis, accuracy, and repeatability.
Features
- Table mounted set-up · Digital calibrator
- Compact and simple to operate · Combined set up for study of I/P and P/I converter
Range of Experiments
- Study of flapper nozzle system
- Study of working principle & calibration procedure of I/P converter
- Study of working principle & calibration procedure of P/I converter
- Study of Linearity, Hysteresis, Accuracy and Repeatability of I/P converter
- Study of Linearity, Hysteresis, Accuracy and Repeatability of P/I converter
Specifications
Product |
Study of I/P and P/I converter |
|
|
Pressure Transmitter |
Type Two wire, Range 0–1 bar, Output 4–20 mA |
|
|
I/P converter |
Input 4-20mA, Output 3-15 psig |
|
|
Signal Isolator |
Input: 4 to 20mA, output 4-20mA |
|
|
Digital Calibrator |
Measure/source, milliamp/millivolt mode |
|
|
Air regulator |
Range 0-2.5 kg/cm2 |
|
|
Air filter regulator |
Range 0-2.5 kg/cm2 |
|
|
Pressure gauge |
Range 0-2.5 kg/cm2(2No), Range 0-7 kg/cm2(1Nos) |
|
|
Overall dimensions |
550Wx300Dx400H mm |
|
|
Optional |
Mini compressor |
|
|
Utilities Required
Electric supply
230 +/- 10 VAC, 50 Hz, 1 phase
Air supply
Clean, oil and moisture free air, pressure 2 Bar, consumption 50 LPH
Technical Details