AL-E601A ELEVATOR LIFT CONTROL MODULE FOR PLC TRAINER
Project Information
- Category: ROBOTICS AND MECHATRONICS
- Sub Category: PLC TRAINER
- Model Number:
- Category: ROBOTICS AND MECHATRONICS
Description
This model is intended as a control object for programming exercises with a control system, PLC or computer. The process consists of a lift cage to be moved between 3+ Ground floors. Push buttons are provided on all the floors to call the lift. The lift cage has LEDs to indicate the lift position and a button for door open/close simulation. Geared DC motor is used to move the cage up and down through a pulley and rope arrangement.
SPECIFICATION
Inputs |
Lift up, Lift down, 4 lift position LEDs 8 acknowledgement LEDs, buzzer for error indication. |
Outputs |
4 proximity sensors, 4 lift calling push buttons Door open / close toggle switch, buzzer, lift up lift down. |
Logic level |
24V DC. |
Connection |
via 4mm patch card terminals or d type sub-plugs for quick connection to PLC base plate. |
Measurements |
650×340×400(H×B×D,mm)approx. |
Technical Details