AL-E538D ELECTRICAL MACHINE TRAINER

Description

AL-E538D ELECTRICAL MACHINE TRAINER

• TECHNICAL SPECIFICATIONS:
• Power Supply Module (Three Phase Input)
• Digital Power Analysis Meter Module
• AC Drive Module 1 Phase(10-220 VAC)
• DC Drive Module (Thyristorized 0-230 VDC)
• AC Drive Module 3 Phase(10-440 VAC)
• Variable DC Voltage Module (10-250VDC)
• Variable Voltage Module Single Phase Output
• Resistive Load Module
• Rheostat 300ohm / 2Amps(Separately)
• Inductive Load Unit
• Capacitive Load Unit
• Three Point DC Starter Module
• DOL Starter Module
• Slip Ring Starter Module
• Tachometer
• Single Phase Transformer 300VA
• Three Phase Transformer 1000VA

Power Supplies:

• DC Power Supply 0-230V AT 2A (Field)
• AC-DC  Power Supply (0-230V,5A) External
  • Operated on Mains power 415V, 50Hz +10%

Digital/Analog Meters:

• Digital AC Voltmeter Module (0-300V AC)
• Digital DC Voltmeter Module (0-300VDC)
• Digital AC Ammeter Module (0-10A AC)
• Digital DC Ammeter Module (0-10A DC)
• Digital AC Wattmeter Module
• Power Factor Meter Module

SALIENT FEATURES:

• Front panel built with high class insulated Bakelite sheet with Sticker well printed circuits and symbols.
• The trainer is housed in Modular Based Rack Type Aluminum Extruded Metal cabinet.
• Instruction manual.
• Patch Cords 4mm (Heavy Duty)
• High Voltage Test Points are Provided With 4mm Safety Sockets
• The trainer is housed in Metal cabinet.
• Protection with Emergency Stop.
• Short Circuit protection with the MCB.
• Size of the trainer set 66”x24”

MOTOR  TECHNICAL SPECIFICATIONS:

1. DC Shunt Motor Capacity : 1/2HP

• Cage : Steel Body
• RPM : 1500 Approx
• Shaft : Double
• Current: 2 Amps Approx.
•  Winding : Armature (A1, A2) , Field (F1, F2)
• Termination: 4mm Safety Sockets
• Power Requirement: 220V DC
• Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

 

1. DC Series Motor Capacity : 1/2HP

• Cage : Steel Body
• RPM : 1500 Approx
• Shaft : Double
• Current: 2 Amps Approx.
•  Winding : Armature (A1, A2)
• Termination: 4mm Safety Sockets
• Power Requirement: 220V DC
• Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

 

1. DC Compound Motor Capacity : 1/2HP

• Cage : Steel Body
• RPM : 1500 Approx
• Shaft : Double
• Current: 2 Amps Approx.
•  Winding : Armature (A1, A2) , Field (F1, F2) Compound Winding (Z1,Z2)
• Termination: 4mm Safety Sockets
• Power Requirement: 220V DC
• Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

1. Induction Motor (3 Phase)

• Capacity : 1/2HP
• Cage : Steel Body
• RPM: 1500 Approx.
• Shaft : Single
• Current: 4 Amps Approx.
• Winding : Stator winding,
• Input Terminal : 3
• Termination: 4mm Safety Sockets
• Mounting : : Foot Mounted arrangement
• Power requirement : 415-440V AC , 50Hz, 3 Phase
• Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

1. AC Slip-Ring Induction Motor

• Capacity : 1/2HP
• Cage : Steel Body
• RPM : 1500 Approx.
• Shaft : Single,
• Current : 2 Amp Approx.
• Input Terminal : R1, R2, R3 and S1, S2, S3
• Power requirement : 415~440V AC , 50Hz, 3 Phase
• Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

1. AC Synchronous Motor Convertable AC Alternator

• Capacity : 1/2HP
• Cage : Steel Body
• RPM: 1500 Approx.
• Shaft : Double
• Current: 2 Amps Approx.
• Input / Output : R, Y, B and neutral with F1 and F2 Terminal (field Terminal)
• Input Voltage : 415~440V AC, 50 Hz,
• Three Phase Output Voltage : 415~440V AC, 50 Hz, Three Phase
• Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

 

1. SINGLE PHASE CAPACITOR START Induction Motor (1 Phase)

• Capacity : 1/2HP
• Cage : Steel Body
• RPM: 1500 Approx.
• Shaft : Single
• Current: 4 Amps Approx.
• Winding : Stator winding,
• Termination: 4mm Safety Sockets
• Mounting : : Foot Mounted arrangement
• Power requirement : 200-220V AC , 50Hz, 1 Phase
• Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

1. SINGLE PHASE CAPACITOR STARTCAPACITOR RUN  Induction Motor (1 Phase)

• Capacity : 1/2HP
• Cage : Steel Body
• RPM: 1500 Approx.
• Shaft : Single
• Current: 4 Amps Approx.
• Winding : Stator winding,
• Termination: 4mm Safety Sockets
• Mounting : : Foot Mounted arrangement
• Power requirement : 200-220V AC , 50Hz, 1 Phase
• Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

1. SINGLE PHASE SPLIT PHASE Induction Motor (1 Phase)

• Capacity : 1/2HP
• Cage : Steel Body
• RPM: 1500 Approx.
• Shaft : Single
• Current: 4 Amps Approx.
• Winding : Stator winding,
• Termination: 4mm Safety Sockets
• Mounting : : Foot Mounted arrangement
• Power requirement : 200-220V AC , 50Hz, 1 Phase
• Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

1. Universal Motor (1 Phase)

• Capacity : 1/2HP
• Cage : Steel Body
• RPM: 3000 Approx.
• Shaft : Single
• Current: 4 Amps Approx.
• Winding : Stator winding,
• Input Terminal : 2
• Mounting : : Foot Mounted arrangement
• Power requirement : 200-220V AC/DC , 50Hz, 1 Phase

 

1. DC Generator Capacity : 1HP

• Cage : Steel Body
• RPM : 1500 Approx
• Shaft : Double
• Current: 2 Amps Approx.
•  Winding : Armature (A1, A2) , Field (F1, F2)
• Termination: 4mm Safety Sockets
• Power Requirement: 220V DC
• Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

1. THREE PHASE  AC Alternator

• Capacity : 1HP
• Cage : Steel Body
• RPM: 1500 Approx.
• Shaft : Double
• Current: 2 Amps Approx.
• Input / Output : R, Y, B and neutral with F1 and F2 Terminal (field Terminal)
• Input Voltage : 415~440V AC, 50 Hz,
• Three Phase Output Voltage : 415~440V AC, 50 Hz, Three Phase
• Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

Technical Details